Requirements: Damp rag or cloth 1 pair of hands for small, 2 pairs of hands for large Smooth, flat wall
Not following these directions will result in poor application and poor adhesion to your wall. This will not constitute a refund or reprint.
Keep box/roll for future storage
Unroll your cartoon wall graphic and lay it flat on the floor. Allow 10 - 15 minutes to adjust to room temperature.
Find a good spot for your cartoon wall graphic. Pick a smooth flat wall. Clean the wall with a damp cloth and dry thoroughly. Wall-Bella will not stick to textured, dirty, stained or wet walls.
Do Not Use any soaps, household detergents, or other chemicals, before installation. Just use a Damp Cloth or Rag. Otherwise you may damage the adhesive.
Remove your cartoon wall graphic from its backing. Do not discard backing paper, put it back into the tube or box. You'll thank us later for this tip.
Starting in the middle and working toward the edges, stick your cartoon wall graphic to the wall. Avoid touching the adhesive, your body produced natural oils and can harm the adhesive. It's ok if it touches it self. Pull it apart slowly and continue.
You can now push out any bubbles working from the inside out. If you have a huge bubble, pull up the closest edge, and lay it back down. If your happy with its position, push firmly on it to make sure it sticks. You can also use the squeegee, if one was provided, to go over your cartoon wall graphic a few times, the more the better.
Take great care on the edges pushing firmly. If one curls up, push it back down.
If you do not like your cartoon wall graphic new home, carefully pull it back up and start over in a new spot.
If you are moving to a new home, or changing the cartoon wall graphic to a new location, put it on the backing paper it came with. If you no longer have it, use wax paper on the back of it.
If treated properly, your Wall bella will last many, many moons. If you are having trouble, please email us at:
